| NHTSA Campaign Number: |
78V188000 |
| Vehicle/Equipment Make: |
DODGE |
| Vehicle/Equipment Model: |
D200 |
| Model Year: |
1978 |
| Manufacturer Campaign Number: |
|
| Manufacturer Component Description: |
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS |
| Manufacturers Involved in Recall: |
CHRYSLER CORPORATION |
| Manufacturered: |
- |
| Type of Report: |
V (Vehicle, Equipment or Tire) |
| Potential Number of Units Affected: |
1400 |
| Date Owner Notified By Manufacturer: |
19781011 |
| Recall Initiated By: |
19781011 |
| Manufacturer Responsible For Recall: |
DAIMLERCHRYSLER CORPORATION |
| Report Received Date: |
19780829 |
| Record Creation Date: |
19791012 |
| Regulation Part Number: |
|
| Federal Motor Vehicle Safety Standard Number: |
|
| Defect Summary: |
DUE TO IMPROPER MATERIAL CONSTRUCTION THE HYDRO-BOOST FLUID RETURN HOSE MAY NOT BE CAPABLE OF WITHSTANDING THE TEMPERATURES AND/OR PRESSURES EXPERIENCED WITH THE HYDRO-BOOST SYSTEM. ALSO, THE HYDRO-BOOST FLUID HIGH PRESSURE HOSE ASSEMBLY MAY HAVE BEEN MISLOCATED, ALLOWING THE ASSEMBLY TO CONTACT THE FRAME SIDE RAIL. ABRASION RESULTING FROM CONTINUED CONTACT ALONG WITH IMPROPER MATERIAL CONSTRUCTION MAY CAUSE PRESSURE HOSE FAILURE. EITHER OF THESE CONDITIONS MAY CAUSE HYDRO-BOOST FLUID LEAKAGE, RESULTING IN THE LOSS OF POWER ASSIST FOR THE STEERING AND BRAKING SYSTEMS. COMPLETE LOSS OF STEERING OR BRAKING WILL NOT OCCUR SINCE BOTH SYSTEMS WOULD REVERT TO MANUAL OPERATION. |
| Consequence Summary: |
|
| Corrective Summary: |
THE DEALER WILL INSTALL A HYDRO-BOOST FLUID RETURN HOSE CONSTRUCTED FORM THE PROPER MATERIAL, POSITIONING THE HOSE ASSEMBLY TO ENSURE ADEQUATE CLEARANCE BETWEEN IT AND THE FRAME SIDE RAIL. |
