| NHTSA Campaign Number: |
97V131000 |
| Vehicle/Equipment Make: |
BMW |
| Vehicle/Equipment Model: |
318IS |
| Model Year: |
1992 |
| Manufacturer Campaign Number: |
|
| Manufacturer Component Description: |
VEHICLE SPEED CONTROL |
| Manufacturers Involved in Recall: |
BAYERISCHE MOTOREN WERKE |
| Manufacturered: |
19920701 - 19970730 |
| Type of Report: |
V (Vehicle, Equipment or Tire) |
| Potential Number of Units Affected: |
410000 |
| Date Owner Notified By Manufacturer: |
19971030 |
| Recall Initiated By: |
19971030 |
| Manufacturer Responsible For Recall: |
BAYERISCHE MOTOREN WERKE |
| Report Received Date: |
19970819 |
| Record Creation Date: |
19970829 |
| Regulation Part Number: |
|
| Federal Motor Vehicle Safety Standard Number: |
|
| Defect Summary: |
THE CRUISE CONTROL AND THROTTLE CABLES ARE ATTACHED TO THE SAME THROTTLE VALVE ACTUATING LEVER AT THE THROTTLE HOUSING. IT IS POSSIBLE THAT THE PLASTIC BUSHING ON EITHER CABLE COULD BREAK DUE TO ENVIRONMENTAL INFLUENCES COUPLED WITH VIBRATION. IF THE BUSHING BREAKS, THE OUTER CABLE HOUSING CAN SEPARATE FROM THE BUSHING. IN THIS CASE, DURING APPLICATION OF THE THROTTLE PEDAL WITHOUT CRUISE CONTROL BEING ENGAGED, THE OUTER TUBE COULD CATCH ON THE EDGE OF THE BROKEN BUSHING. |
| Consequence Summary: |
THIS COULD CAUSE THE THROTTLE VALVE TO REMAIN PARTIALLY OPEN. IT HIS WERE TO OCCUR, THE CAR MIGHT NOT DECELERATE AS EXPECTED INCREASING THE RISK OF A VEHICLE CRASH. |
| Corrective Summary: |
DEALERS WILL INSTALL A SPRING STEEL CLIP ON THE OUTER TUBE OF EACH CABLE IN THE AREA OF THE ADJUSTING SCREW AND PLASTIC BUSHING. THE CLIP IS DESIGNED TO PREVENT THE OUTER TUBE FROM DISLODGING FROM THE BUSHING. |
