| NHTSA Campaign Number: |
94V151000 |
| Vehicle/Equipment Make: |
BMW |
| Vehicle/Equipment Model: |
325 |
| Model Year: |
1993 |
| Manufacturer Campaign Number: |
|
| Manufacturer Component Description: |
SEAT BELTS:FRONT:ANCHORAGE |
| Manufacturers Involved in Recall: |
BAYERISCHE MOTOREN WERKE |
| Manufacturered: |
19920901 - 19940801 |
| Type of Report: |
V (Vehicle, Equipment or Tire) |
| Potential Number of Units Affected: |
57000 |
| Date Owner Notified By Manufacturer: |
19941202 |
| Recall Initiated By: |
19941202 |
| Manufacturer Responsible For Recall: |
BAYERISCHE MOTOREN WERKE |
| Report Received Date: |
19940810 |
| Record Creation Date: |
19940818 |
| Regulation Part Number: |
571 |
| Federal Motor Vehicle Safety Standard Number: |
208 |
| Defect Summary: |
IN A FMVSS NO. 208 30 MILES-PER-HOUR COMPLIANCE TEST, AN UNBELTED TEST DRIVER DUMMY'S CHEST MAXIMUM RESULTANT ACCELERATION WAS 70.8 G'S, WHICH EXCEEDS THE MAXIMUM ALLOWABLE VALUE OF 60 G'S. ALSO, THE UNBELTED PASSENGER DUMMY'S LEFT FEMUR MAXIMUM LOAD WAS 2361 LBS, WHICH EXCEEDS MAXIMUM ALLOWABLE VALUE OF 2250 LBS. THE VEHICLES DO NOT COMPLY WITH FMVSS NO. 208, "OCCUPANT CRASH PROTECTION." |
| Consequence Summary: |
CONSEQUENCE OF NON-COMPLIANCE: IN THE EVENT OF AN ACCIDENT, THE OCCUPANT WILL BE SUBJECTED TO AN INCREASED RISK OF INJURY. |
| Corrective Summary: |
ON AUTOMATIC TRANSMISSION MODELS ONLY, THE DEALER WILL REPLACE THE TRANSMISSION SUPPORT CROSSMEMBER WITH A CROSSMEMBER USED ON THE MANUAL TRANSMISSION MODEL. ALSO, THE TRANSMISSION REAR BUSHING SUPPORTS WILL BE REPLACED WITH BUSHING HAVING DIFFERENT PERFORMANCE CHARACTERISTICS. THE STEERING COLUMN FRONT SUPPORT BEARING AT THE FIREWALL WILL BE REPLACED WITH A MODIFIED PART USING A TEFLON INNER SURFACE AND TEFLON SPRAY WILL BE APPLIED TO THE COLUMN HOUSING IN THE AREA OF THE BEARING. A BRACE WILL BE ADDED BETWEEN THE KNEE BOLSTER SUPPORT AND THE STEERING COLUMN. |
