| NHTSA Campaign Number: |
94V182000 |
| Vehicle/Equipment Make: |
FLEETWOOD |
| Vehicle/Equipment Model: |
CHESAPEAKE CP |
| Model Year: |
1995 |
| Manufacturer Campaign Number: |
|
| Manufacturer Component Description: |
SUSPENSION:REAR:AXLE:NON-POWERED AXLE ASSEMBLY |
| Manufacturers Involved in Recall: |
FLEETWOOD FOLDING TRAILER |
| Manufacturered: |
19940601 - 19940801 |
| Type of Report: |
V (Vehicle, Equipment or Tire) |
| Potential Number of Units Affected: |
4233 |
| Date Owner Notified By Manufacturer: |
19940926 |
| Recall Initiated By: |
19940926 |
| Manufacturer Responsible For Recall: |
FLEETWOOD ENTERPRISES, INC. |
| Report Received Date: |
19940920 |
| Record Creation Date: |
19940930 |
| Regulation Part Number: |
|
| Federal Motor Vehicle Safety Standard Number: |
|
| Defect Summary: |
INSUFFICIENT GREASE WAS APPLIED TO THE TRAILER AXLE HUB INNER BEARING CAUSING THE BEARING TO OVERHEAT DURING TOW OPERATIONS. THE OVERHEATED BEARING CAN SEIZE TO THE AXLE SPINDLE CAUSING THE TRAILER AXLE HUB TO BREAK AT THE REAR SEAL FLANGE. |
| Consequence Summary: |
A BROKEN TRAILER AXLE CAUSES LOSS OF TRAILER CONTROL AND RESULTS IN A ACCIDENT. |
| Corrective Summary: |
DEALERS WILL REMOVE THE TRAILER'S AXLE HUBS AND INSPECT THE INNER BEARINGS FOR SUFFICIENT GREASE AND ALSO INSPECT ALL RELATED AXLE PARTS SUCH AS BEARING RACES AND AXLE SPINDLE FOR WEAR. THE BEARINGS WILL BE REPACKED OR REPLACED IF NECESSARY AND NEW GREASE SEALS WILL BE INSTALLED. NOTE: IF THE VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME OR THE REMEDY DOES NOT CORRECT THE DEFECT, PLEASE CONTACT FLEETWOOD FOLDING TRAILER AT 1-800-544-8193. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393. |
